The information in this FAQ applies to the following:

• 10X-98 and TSMIU version MIU units

We get a lot of questions regarding which outputs are mapped to particular functions. Below is a list that defines what each output is tied to.

1 = Part Qualification - defined in the process sheet by process parameter

2 = Signal (s) Out of Spec. Limit

3 = Pressure Transfer

4 = Not in production

5 = Lot Size Exceeded

6 = Signal(s) Too High

7 = All Signals OK

8 = Signal (s) Too Low

For additional information, contact the helpdesk.